Michael Wrote:
Need a brushroller drive belt for a Hoover nano. Model- UH20020. Belt does not have a number on it.
| ||||||
Pat Wrote: I have a Hoover Steam Vac Plus 1000 w/ 5 rotating brushes. The little black sponge filter was destroyed. I would like to order replacements and whatever else I might need (haven’t used the shampooer for a few years –had hard wood floors and didn’t need for awhile,but I do [...] Linda Wrote: What part number would i need for the belts on the hoover C1412 Hi I have a Hoover fsF7411-900 carpet steam cleaner. My problem is that when i fill the water tank it does not leak. as soon as i put it in the cleaner water runs out. When i look at the tank in place locating the tank is opening the water release valve inside it? Can you advise. Thanks Hoover model F7452-900 my brushes quit turning. What part do I need to replace I just bought a Hoover SteamVac Dual at a yard sale and the lady said that the clip is broke on the Brush Block Asssembly. Can just the clip be replaced or is that a plastic part that is just boken and will need a whole new assembley? Leaking valves on the Hoover SteamVac Dual V Series are a common problem. Typical model numbers for this line are the F7210-900 and the F7452-900,but if your model number has the number 7 after the F then this post applies to your model as well. NOTE:If the Solution tank on your Hoover [...] I’ve sold,serviced and repaired just about every brand and model of SteamVac and carpet cleaner in the 18 years I’ve been in the floor care / vacuum cleaner business. I have to say that in my experience,there is just no such thing as a Big Box Store Carpet cleaner that will clean as [...] I have a Hoover Foldaway vac that needs belts and a filter can you help me is there an extra long extension hose for the hoover uh30310? | ||||||
| Copyright ©2012 Ask The Vacuum Cleaner Shop - All Rights Reserved | ||||||